DermaGuard | theconcuregroup.com

CONCRETE POLISH & SEALER

DermaGuard is a multi-functional colloidal based sealer that is designed to protect, seal and give concrete a 3D effect by the process of polishing.
DermaGuard will enhance the color and clarity of concrete to be used a finished floor. DermaGuard, through the process of fusion, will increase the abrasion and stain resistance as well as the longevity of the concrete slab it is applied to.

Stain and abrasion resistance
Color and clarity enhancement
UV Stable/ Non-yellowing
Zero compliant
Low odor

Oil and food resistant
Reduction in maintenance cost
Enhanced light reflection
Improves durability and functionality

MIXING AND APPLICATION:

Shake or mix DermaGuard prior to diluting or use. Mix for 30 seconds at 400 rpms.

If diluting use clean potable water at room temperature. Use a pump sprayer or a low pressure airless sprayer to apply DermaGuard. The spray tips should be 6-10 for an airless sprayer.

Spray about 12 inches from ground in an even manner. Use a microfiber mop to spread material. Wet microfiber mop before applying DermaGuard. If second coat is

needed, apply when first coat is dry. Keep your shoes or boots clean, no dust, no moisture on the soles of your feet.